![]() ![]() If you have another app (such as DJI Fly or DJI Go) set as the default app to launch when you connect the remote controller, you will need to clear the defaults for that app: go to mobile device Settings - Apps - DJI Go (or other app name) - Clear Defaults.Make sure no DJI-based apps (including DJI Fly, DJI Go and other third party apps) are running in the background. ![]() To connect using a cable (Mini, Air, Mavic, Phantom 3 Adv/Pro, Phantom 4 and Inspire series), follow these steps: Then, depending on your mobile platform, follow the steps below. You can update the firmware using DJI Fly/Go, or for older drone models download them from dji.com. The registration is done in the background, if the registration failed you will be notified with an error popup.īe aware that some Internet connections may have troubles connecting to DJI servers, in such a case make sure to try a different Internet connection (home wifi, mobile data connection, a friend's connection, public wifi, etc).įirst, ensure you are using the latest DJI firmwares on both your drone and remote controller if you are using one. Registration with DJI servers can be done without being connected to a DJI drone. When starting the app for the first time after installation, you will need to be connected to Internet in order to register the app with DJI servers. Camera Settings: Tap to open camera settings.Match your mobile device's position relative to north. Tap to have the map rotation continuously adjusted to Unlock Map Orientation: By default the map is oriented towards North.Zoom to Mobile Device: Tap to zoom the map to the current mobile device.The faster you move your finger, the faster the gimbal speed. To move the gimbal, touch the video screen, then scroll up or down. Gimbal Pitch Indicator: Shows the current position of the gimbal tilt.Record: Tap this button to start and stop recording.Depending on the photo quality setting, using this button while recording will either take screengrabs (max 1080p resolution) or full resolution pictures (at the cost of interrupting the recording for two seconds). Works while recording for most resolution/field of view settings. Take Photo: Tap this button to take one or several pictures depending on the current photo mode.To set a new home point, drag this marker to another location. Home Point: Shows the home point location on the map. ![]() Waypoint or Point of Interest at the mobile device location.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |